It has been a while since I announced the home automation over ethernet project. It’s time to make some progress!

I’ve been writing some basic software for the microcontroller making it possible to switch leds on and off and change the IP and MAC address of the modules. Also on the hardware part some decisions have been made. As mentioned in the previous post the modules will be mounted on a DIN rail. The microcontroller will have it’s own housing. Outputs and inputs will have a separate housing making it possible to create different configurations.

For the creation of the circuit boards the “Toner Transfer” method will be used. This is a cheap and accurate method to create prototypes. When I start creating the PCB’s I will explain this method in detail.

The software running on the server will not be written in VB.net but in Java since I want to leave the option for Linux as operating system open. Below you find a screenshot of the main screen. This is really an early development version, but it gives an idea.

The next step, something for tomorrow, will be ordering some electric components to create the prototype modules. To be continued.=;;

A lot of houses are equipped with a wired Ethernet LAN. So why install an extra network just to turn on and of a light bulb or dim a light? Wouldn’t it be possible to use an ordinary Ethernet connection to control our home appliances?

On my job I use ‘Industrial Ethernet’ everyday. It’s like your home LAN, but with more expensive switches and, in general, green wires and fancy connectors. The principles are the same, but for security reasons it’s separated from the office LAN. For home automation purposes it’s not necessary to separate the networks, actually it’s better to have only one network. That way I’ll be able to control the appliances from my computer.

My user requirements:

• Create a micro controller based module that ’speaks’ Ethernet.
• Make expansion modules to add relays, dimmers and inputs to the CPU.
• A user interface (VB.net and/or web based) to control the modules
• A computer service handling the logics (for time based switching etc.)
• …

To create the CPU module I’ll use a webserver board from http://tuxgraphics.org/, when the basics are programmed I’ll go on developping the hardware.

As enclosure for the modules I will use DIN-rail housings. This will not be the first concern, but size WILL matter while developping the printed circuit boards.

Things to do:

• Find the right programming and development tools
• Design PCB’s (probably with EAGLE)
• Make the PCB’s

The first two points on the short time to-do list are clear. The last one, the production of the circuit board, I’m not yet sure about. I never made a circuit board before. Will I use my CNC router do isolate the paths, make a UV box and use boards with a light sensitive layer or just find a company to produce the boards? I don’t know yet, suggestions are appreciated…